A full-contact decontamination and protection service built to safely lift embedded grime without inflicting swirl marks or marring — the most common damage caused by improper washing.
Wheel & tire cleaning — Dedicated wheel-safe chemicals break down brake dust (which is metallic and corrosive to clear coat and wheel finishes) and compacted road grime, restoring wheels without acid-based strippers that can etch factory clear coat over time.
Pre-wash foam — A high-alkaline snow foam is applied first to encapsulate and lift loose organic material and surface dirt, allowing contaminants to slide off before any physical contact is made with the paint.
Contact wash — A pH-neutral shampoo paired with a premium microfiber wash mitt using the two-bucket method to physically lift remaining residue while minimizing the fine, hairline scratching (swirls) that lower-quality washes introduce.
Wax / drying aid — A foam-based carnauba wax is applied during the drying stage, sealing in gloss and laying down a hydrophobic barrier that sheds water and environmental grime for 4–6 weeks.
Tire shine — A water-based, satin-finish dressing that resists sling (the flinging of residue onto paint and wheel wells at speed) while holding its look far longer than solvent-based alternatives.
~45 minutes
This is a deeper-level correction and protection service, engineered to strip away what a standard wash physically can't touch and lock in a longer-lasting barrier against the elements.
Everything in the Contact Wash & Wax package (minus the wax) — Full wheel, tire, pre-wash, and contact wash treatment as the decontamination foundation.
Sap, tar, and adhesive removal — Solvent-based treatments break the bond of stubborn organic and industrial residues without damaging the underlying clear coat.
Clay treatment — A detailing clay bar is glided across the paint using a lubricant to physically shear off bonded contaminants — rail dust, overspray, industrial fallout — that sit embedded below the surface and are invisible to the eye but easily felt as roughness. The result is a glass-smooth finish that's mechanically clean, not just visually clean.
Ceramic sealant — Applied to all exterior surfaces, this forms a semi-permanent, cross-linked protective layer that shields against UV oxidation, environmental contaminants, and etching. It delivers a higher level of gloss and slicker hydrophobic performance than wax, with protection lasting around 3 months.
~1 hour